CN
EN
This is a specialized fan, derived from the WK-GM series axial flow fan, specifically developed for Hengli Heavy Industries to provide ventilation and air exchange in narrow areas on ships.
|
FAN PARAMETERS |
||
|
Airflow range |
8700-13500m³/h |
|
|
Wind pressure range |
2400Pa-1000Pa |
|
|
Drive form |
Direct drive |
|
|
Explosion proof parameters |
The explosion-proof mark is Ex db eb IIB T4 Gb |
|
|
Environmental conditions for use |
1) Altitude not exceeding 2000m; 2) The operating environment temperature ranges from -20 ℃ to+40 ℃; 3) The relative humidity of the surrounding air is not greater than 95% (25 ℃); 4) In environments containing explosive gases (Zone 1, Zone 2); 5) In places without significant shaking or severe impact vibration; 6) There should be no insulation damaging medium around. |
|
- Double cast aluminum wing shaped axial flow impeller at the front and rear ends of the motor, with high air volume and high pressure;
- Impeller balance level G2.5, running smoothly;
- The air outlet has dual air ducts with clamps, which can quickly install two air sleeves to supply air to different positions.